[Rspamd-Users] rspamd coredump on FreeBSD 14.1

[G.W. Haywood]

Hi there,

On Sat, 17 Aug 2024, Odhiambo Washington wrote:

> ping!
>
> On Wed, Aug 14, 2024 at 12:44 PM Odhiambo Washington <odhiambo at gmail.com>
> wrote:
>
>> My rspamd refuses to start.
>> So I uninstalled it, removed all my configs and reinstalled and it still
>> won't start.

I'm not sure that you've provided enough information for anyone to
help you more than they already have.  There are plenty of articles on
the Web to help you collect that information and present it.

Try to start at the beginning.  Debug output is usually too detailed
for a first question.  It's also more useful if you describe exactly
what it is you're debugging, and if what you're debugging was built
with the debugging symbols which the debugger needs to show you
exactly what's going on.  That usually means building it yourself from
source (which I'm guessing you didn't do but you didn't tell us) with
debugging symbols enabled.  To be clear, I don't think that's called
for at this stage.  It looks to me like you haven't properly followed
the right installation guide (exactly what did you do?) or you've done
something horrible to your FreeBSD installation, possibly unrelated to
rspamd in any way.

This page

https://www.freshports.org/mail/rspamd/

is linked directly from the BSD tab at

https://rspamd.com/downloads.html

which I take to be the proper installation instructions, since they're
maintained by the author of rspamd and were last updated on 2024-07-23.

It's decades since I last used FreeBSD, so I might be out of my depth
trying to offer any more detailed help, but I'm a little puzzled that
you're trying to run the rspamd binary directly, and not instead using
some startup script.  That just doesn't seem right to me.

HTH

-- 

73,
Ged.